HDT-CR4 Denso Common Rail Injection Module

Denso Common Rail Injection
(Usually 2004 model year and up)

Installation is very basic for the HDT-CR4 module. You must locate and unplug the connector from the sensor. at the fuel rail. The latch must be depressed to release the connector from the sensor. Do NOT pull on the wires, and do NOT break the locking mechanism of this connector / sensor.
Connect the wiring harness supplied with the Power Module to both open connectors from the fuel rail sensor. Make sure both connectors ‘lock-in’, as you should hear a ‘click’ when they connect.
Your HDT-CR4 Module is pre-set to provide an additional 30% power increase from your stock H.P. setting. These units are adjustable between 15-45% power increase. You can simply connect the HDT-CR4 module into the Harness & GO!

  • Item #: HDT-CR4

HDT-CR4 Denso Common Rail Injection Module

Price: $669.00
* Marked fields are required.
Qty: *